NSK NU304-W Cylindrical Roller Bearing - 20 mm ID, 52 mm OD, 15 mm Width Yoke Type Track Roller 1 unlocking pin and 1

1 unlocking pin and 1 holster - so the Koloss can always be at hand

The bell-shaped direct press ball joint puller of series 127 is used to press out the ball pins when removing ball joints as well as tie rod ends on tie rods in automotive and industry

The hooks or arms of the PULLPO are inserted into the outer ring of the bearing using the rings

The flush-mounted reversing lever allows the user to switch motion left to right without needing to remove the wrench from the fastener increasing productivity

NSK NU304-W Cylindrical Roller Bearing - 20 mm ID, 52 mm OD, 15 mm Width Yoke Type Track Roller 1 unlocking pin and 1Cylindrical Roller Bearing NSK cylindrical roller bearings handle heavy radial loads with high speed and stiffness. The line contact between rollers and raceways gives them high load capacity, and the various designs (NU, NJ, NUP, N) allow them to accommodate axial displacement or take small axial loads. They are ideal for gearboxes, electric motors, and heavy industrial equipment.